8T Excavators
Single Speed
| MODEL | 5DDS | 6DDS | 7DDS |
|---|---|---|---|
| Torque ft-lbs @ 3000 Psi | 3,903 | 4,909 | 6,162 |
| Max Torque ft-lbs @ 3500 Psi | 4,553 | 5,728 | 7,189 |
| Recommended flow (Gpm) | 10 – 36 | 12 – 36 | 14 – 36 |
| Motor Type | Eaton | Eaton | Eaton |
| Max Pressure – do not exceed | 3500 PSI @ 27 GPM | ||
| Max Flow – do not exceed | 55 GPM @ 1700 PSI | ||
| Max horse power | 55 | 55 | 55 |
| Pressure relief valve | INCLUDED | INCLUDED | INCLUDED |
| Standard Output Shaft | 2.5″ Hex | 2.5″ Hex | 2.5″ Hex |
| Recommended Auger | A6 / RC6 | A6 / RC6 | A6 / RC6 |
| Max Auger Diameter Clay / Shale** | 24″ | 30″ | 30″ |
| Max Auger Diameter Earth** | 40″ | 40″ | 48″ |
| Weight (lbs) | 290 | 290 | 290 |
| Overall length (in) | 33.7″ | 33.7″ | 33.7″ |
| Diameter (in) | 11.4″ | 11.4″ | 11.4″ |
Two Speed
| MODEL | 5DDT | 6DDT | 7DDT |
|---|---|---|---|
| Torque ft-lbs @ 3000 Psi | 4,067 | 5,012 | 6,306 |
| Max Torque ft-lbs @ 3500 Psi | 4,745 | 5,847 | 7,357 |
| Recommended flow (Gpm) | 10 – 36 | 10 – 36 | 10 – 36 |
| Motor Type | Eaton | Eaton | Eaton |
| Max Pressure – do not exceed | 3500 PSI @ 27 GPM | ||
| Max Flow – do not exceed | 53 GPM @ 1800 PSI | ||
| Max horse power | 55 | 55 | 55 |
| Pressure relief valve | INCLUDED | INCLUDED | INCLUDED |
| Standard Output Shaft | 2.5″ Hex | 2.5″ Hex | 2.5″ Hex |
| Recommended Auger | A6 / RC6 | A6 / RC6 | A6 / RC6 |
| Max Auger Diameter Clay / Shale** | 24″ | 30″ | 30″ |
| Max Auger Diameter Earth** | 40″ | 40″ | 48″ |
| Weight (lbs) | 350 | 350 | 350 |
| Overall length (in) | 34.4″ | 34.4″ | 34.4″ |
| Diameter (in) | 13.4″ | 13.4″ | 14.4″ |
9T – 12T Excavators
Single Speed
| MODEL | 9DDS | 12DDS | |
|---|---|---|---|
| Torque ft-lbs @ 3000 Psi | 7,811 | 9,893 | |
| Max Torque ft-lbs @ 3500 Psi | 9,112 | 11,542 | |
| Recommended flow (Gpm) | 18 – 48 | 22 – 48 | |
| Motor Type | Eaton | Eaton | |
| Max Pressure – do not exceed | 3500 PSI @ 29 GPM | ||
| Max Flow – do not exceed | 55 GPM @ 1800 PSI | ||
| Max horse power | 60 | 60 | |
| Pressure relief valve | INCLUDED | INCLUDED | |
| Standard Output Shaft | 2.5″ Hex | 2.5″ Hex | |
| Recommended Auger | A8 / RC8 | A8 / RC8 | |
| Max Auger Diameter Clay / Shale** | 48″ | 36″ | |
| Max Auger Diameter Earth** | 48″ | 48″ | |
| Weight (lbs) | 350 | 350 | |
| Overall length (in) | 37.2″ | 37.2″ | |
| Diameter (in) | 11.4″ | 11.4″ | |
Two Speed
| MODEL | 12DDT | ||
|---|---|---|---|
| Torque ft-lbs @ 3000 Psi | 10,310 | ||
| Max Torque ft-lbs @ 3500 Psi | 12,028 | ||
| Recommended flow (Gpm) | 10 – 46 | ||
| Motor Type | Eaton | ||
| Max Pressure – do not exceed | 3500 PSI @ 27 GPM | ||
| Max Flow – do not exceed | 53 GPM @ 1950 PSI | ||
| Max horse power | 60 | ||
| Pressure relief valve | INCLUDED | ||
| Standard Output Shaft | 2.5″ Hex | ||
| Recommended Auger | A8 / RC8 | ||
| Max Auger Diameter Clay / Shale** | 36″ | ||
| Max Auger Diameter Earth** | 48″ | ||
| Weight (lbs) | 376 | ||
| Overall length (in) | 35.7″ | ||
| Diameter (in) | 14.4″ | ||
13T – 16T Excavators
Single Speed
| MODEL | 13DDS | 16DDS | |
|---|---|---|---|
| Torque ft-lbs @ 3000 Psi | 10,978 | 13,810 | |
| Max Torque ft-lbs @ 3500 Psi | 12,808 | 16,111 | |
| Recommended flow (Gpm) | 26 – 54 | 26 – 54 | |
| Motor Type | Eaton | Eaton | |
| Max Pressure – do not exceed | 3500 PSI @ 33 GPM | ||
| Max Flow – do not exceed | 61 GPM @ 1800 PSI | ||
| Max horse power | 67 | 67 | |
| Pressure relief valve | INCLUDED | INCLUDED | |
| Standard Output Shaft | 3″ Hex | 3″ Hex | |
| Recommended Auger | A8 / RC8 / RC10 | A8 / RC8 / RC10 | |
| Max Auger Diameter Clay / Shale** | 36″ | 48″ | |
| Max Auger Diameter Earth** | 60″ | 60″ | |
| Weight (lbs) | 370 | 370 | |
| Overall length (in) | 39.96″ | 39.96″ | |
| Diameter (in) | 11.4″ | 11.4″ | |
Two Speed
| MODEL | 13DDT | 16DDT | |
|---|---|---|---|
| Torque ft-lbs @ 3000 Psi | 11,441 | 14,098 | |
| Max Torque ft-lbs @ 3500 Psi | 13,347 | 16,448 | |
| Recommended flow (Gpm) | 16 – 53 | 20 – 53 | |
| Motor Type | Eaton | Eaton | |
| Max Pressure – do not exceed | 3500 PSI @ 33 GPM | ||
| Max Flow – do not exceed | 53 GPM @ 2200 PSI | ||
| Max horse power | 67 | 67 | |
| Pressure relief valve | INCLUDED | INCLUDED | |
| Standard Output Shaft | 2.5″ Hex | 2.5″ Hex | |
| Recommended Auger | A8 / RC8 / RC10 | A8 / RC8 / RC10 | |
| Max Auger Diameter Clay / Shale** | 36″ | 48″ | |
| Max Auger Diameter Earth** | 60″ | 60″ | |
| Weight (lbs) | 394 | 394 | |
| Overall length (in) | 38.6″ | 38.6″ | |
| Diameter (in) | 14.4″ | 14.4″ | |
18T – 30T Excavators
Single Speed
| MODEL | 20DDS | 25DDS | 30DDS |
|---|---|---|---|
| Recommended flow (Gpm) | 26 – 60 | 26 – 60 | 26 – 60 |
| Motor Type | Eaton | Eaton | Eaton |
| Max Pressure – do not exceed | 3500 PSI @ 33 GPM | ||
| Max Flow – do not exceed | 61 GPM @ 1800 PSI | ||
| Max horse power | 67 | 67 | 67 |
| Pressure relief valve | INCLUDED | INCLUDED | INCLUDED |
| Standard Output Shaft | 100mm Square | 100mm Square | 100mm Square |
| Recommended Auger | RC10 / RC11 | RC10 / RC11 | RC10 / RC11 |
| Max Auger Diameter Clay / Shale** | 60″ | 60″ | 60″ |
| Max Auger Diameter Earth** | 72″ | 72″ | 78″ |
| Weight (lbs) | 640 | 640 | 640 |
| Overall length (in) | 45.3″ | 45.3″ | 45.3″ |
| Diameter (in) | 14″ | 14″ | 14″ |
Two Speed
| MODEL | 20DDT | 25DDT | 30DDT |
|---|---|---|---|
| Max Torque ft-lbs @ 3500 Psi | 20,309 | 25,027 | 31,489 |
| Recommended flow (Gpm) | 20 – 53 | 20 – 53 | 20 – 53 |
| Motor Type | Eaton | Eaton | Eaton |
| Max Pressure – do not exceed | 3500 PSI @ 39 GPM | ||
| Max Flow – do not exceed | 53 GPM @ 2600 PSI | ||
| Max horse power | 80 | 80 | 80 |
| Pressure relief valve | INCLUDED | INCLUDED | INCLUDED |
| Standard Output Shaft | 100mm Square | 100mm Square | 100mm Square |
| Recommended Auger | RC10 / RC11 | RC10 / RC11 | RC10 / RC11 |
| Max Auger Diameter Clay / Shale** | 60″ | 60″ | 60″ |
| Max Auger Diameter Earth** | 72″ | 72″ | 72″ |
| Weight (lbs) | 670 | 670 | 670 |
| Overall length (in) | 45.9″ | 45.9″ | 45.9″ |
| Diameter (in) | 14″ | 14″ | 14″ |
15T – 30T Excavators
Supa Drives
| MODEL | SD 45 | SD 50 | SD 70 |
|---|---|---|---|
| Nominal Torque (Ft Lbs) | 32,892 | 38,569 | 50,465 |
| Recommended flow (Gpm) | 20 – 63 | 20 – 63 | 20 – 63 |
| Maximum Pressure – do not exceed | 3,500 PSI @ 100 GPM | ||
| Maximum Flow – do not exceed | 100 GPM @ 3,500 PSI | ||
| Maximum horse power | 201 | 201 | 201 |
| Motor Type | Radial Piston | Radial Piston | Radial Piston |
| Pressure relief valve | INCLUDED | INCLUDED | INCLUDED |
| Energy Control Vlave | INCLUDED | INCLUDED | INCLUDED |
| Standard Output Shaft | 100mm Square | 100mm Square | 100mm Square |
| Recommended Auger | RC10 / RC11 | RC10 / RC11 | RC10 / RC11 |
| Max Auger Diameter Clay / Shale** | 60″ | 60″ | 60″ |
| Max Auger Diameter Earth** | 79″ | 79″ | 79″ |
| Weight (lbs) | 1843 | 1843 | 1843 |
| Overall length (in) | 50.9″ | 50.9″ | 50.9″ |
| Diameter (in) | 23.6″ | 23.6″ | 23.6″ |
Machines 8T – 10T
| MODEL | A6 | RC6 |
|---|---|---|
| Drilling Conditions | General | Combo Rock / Earth |
| Hub | 2.5″ Hex | 2.5″ Hex |
| Optional Hub | 2″ Hex | 2″ Hex |
| Oal | 60″ | 60″ |
| Pipe | 3″ – 5.5″ | 3″ – 5.5″ |
| Flights (lead) | 5 / 16″ | 5 / 16″ |
| Flights (carry) | 5 / 16″ | 5 / 16″ |
| Teeth | Tm | Tt |
| Pilot | PM – HX – 3 | PH – 3 |
| Max Size | 60″ | 60″ |
| Ideal Drives | 4DD – 7DD | 4DD – 7DD |
| Optimum Drilling Speeds | ||
| Earth | 55 – 65 | 55 – 65 |
| Clay | 45 – 55 | 45 – 55 |
| Shale (Fracturable Rock) | 25 – 45 | 25 – 45 |
| Heavy Rock | ||
| Auger Features | Double start, single carry flight configuration. Flight pitch is shallow for greater soil retention. Heavy duty body, for greater durability in tough conditions. | |
Excavators / Machines 10T – 15T
| MODEL | A6 | RC6 |
|---|---|---|
| Drilling Conditions | General | Combo Rock / Earth |
| Hub | 2.5″ Hex | 2.5″ Hex |
| Optional Hub | 3″ Hex | 3″ Hex |
| Oal | 60″ | 60″ |
| Pipe | 3″ – 6.5″ | 3″ – 6.5″ |
| Flights (lead) | 3 / 8″ | 3 / 8″ |
| Flights (carry) | 3 / 8″ | 3 / 8″ |
| Teeth | Tm | Tt |
| Pilot | PM – HX – 3 | PH – 3 / PH – 3XL |
| Max Size | 60″ | 60″ |
| Ideal Drives | 9DD – 16DD | 9DD – 16DD |
| Optimum Drilling Speeds | ||
| Earth | 55 – 65 | 55 – 65 |
| Clay | 45 – 55 | 45 – 55 |
| Shale (Fracturable Rock) | 25 – 45 | 25 – 45 |
| Heavy Rock | 10 – 25 | |
| Auger Features | Double flight configuration. Heavy duty body for greater strength with largermachines provide for optimum drilling on mid sized machines. | |
Excavators / Machines 20T – 50T
| DESCRIPTION | UP – 30T | UP – 50T |
|---|---|---|
| MODEL | A6 | RC6 |
| Drilling Conditions | Combo Rock / Earth | Heavy Duty Rock / Earth |
| Hub | 100mm Square | 100mm Square |
| Optional Hub | 3″ Hex | 3″ Hex |
| Oal | 60″ | 60″ |
| Pipe | 3″ – 6.5″ | 3″ – 6.5″ |
| Flights (lead) | 5 / 8″ | 5 / 8″ |
| Flights (carry) | 5 / 8″ | 5 / 8″ |
| Teeth | Ttd | Ttl |
| Pilot | PH – 3 / PH – 3XL | PH – 3XL |
| Max Size | 60″ | 60″ |
| Ideal Drives | 13DD – 30DD | 13DD – 30DD |
| Optimum Drilling Speeds | ||
| Earth | 55 – 65 | 55 – 65 |
| Clay | 45 – 55 | 45 – 55 |
| Shale (Fracturable Rock) | 25 – 45 | 25 – 45 |
| Heavy Rock | 10 – 25 | 10 – 25 |
| Auger Features | Double flight configuration. Upgraded flights from 3/8″ to 5/8″ for greater durability & performance with larger machines. | |
Dedicated Rock Augers
| MODEL | DR4 | DR6 | DR8 | DR11 |
|---|---|---|---|---|
| Drilling Conditions | Dedicated Rock Auger | Dedicated Rock Auger | Dedicated Rock Auger | Dedicated Rock Auger |
| Hub | 2.5″ Hex | 3″ | 4″ Square | 4″ Square |
| Optional Hub | 2″ Hex | 2.5″ Hex | 3″ Hex | 3″ Hex |
| Oal | 60″ | 60″ | 60″ | 60″ |
| Pipe | 4.4″ | 5.1″ hollow bar | 5.1″ hollow bar | 5.1″ hollow bar |
| Flights (lead) | 5 / 8″ | 13 / 16″ | 13 / 16″ | 1″ |
| Flights (carry) | 3 / 8″ | 5 / 8″ | 13 / 16″ | 13 / 16″ |
| Teeth | 3 / 4″ Rock Pick | 3 / 4″ Rock Pick | 3 / 4″ Rock Pick | 1″ Rock Pick |
| Pilot | RTP | RTP | RTP | LGR RTP |
| Max Size | 35″ | 40″ | 70″ | 70″ |
| Ideal Drives | 5DD – 7DD | 9DD – 16DD | 13DD – 30DD | 13DD – 30DD – SD 45 |
| Optimum Drilling Speeds | ||||
| Shale (Fracturable Rock) | 25 – 45 | 25 – 45 | 25 – 45 | 25 – 45 |
| Heavy Rock | 10 – 25 | 10 – 25 | 10 – 25 | 10 – 25 |
| Auger Features | Double start, single carry flight configuration. Shallow flight pitch for max spoil removal. Short flighted augers, encourages regular removal of spoil, allowing cool air to enter the hole & regular inspection of teeth. | |||
